Start Circuit adapted from Goathumper's PnP thread:
M1.3 Pin: Color: M3.3 Pin: Color: Function:
18 Red 26 Red Battery Voltage Banded end of 1n4001
27 Green 56 Green Ignition Switch, Terminal 15 Base of 2n2222a
36 Green 27 Brown ECM relay, terminal 85 Collector of 2n2222a, 1n4001
Ground Emitter of 2n2222a
E36 Harness Instructions:
1 The Emitter connects to ground
2 The Base connect to pin 56 with a 7.5k ohm resistor
3 The Collector connects to pin 27
4 The 1n4001 diode connects to pin 26 and 27 with the banded end towards 26
E30 Harness Instructions:
1 The Emitter (2n2222a) connects to ground
2 The Base (2n2222a) connect to pin 27 with a 7.5k ohm resistor
3 The Collector (2n2222a) connects to pin 36
4 The 1n4001 diode connects to pin 18 and 36 with the banded end towards 18